The Effect of Mn Depleted Surface Layer on the Corrosion Resistance of Shape Memory Fe-Mn-Si-Cr Alloys

In this work, we have examined Fe-Mn-Si-Cr alloys possessing a good shape memory effect due to a high Mn content (28 wt pct). The addition of Cr (5 wt pct) was made in order to give fairly good corrosion resistance to the alloy. But we have verified that even in moderately corrosive environ-ments, the presence of chromium does not bear any passivation. On the other hand, we have found that the alloy can acquire corrosion resistance by means of the formation of a Mn-depleted surface layer obtained by heating the alloy at high temperature (.10507C) in air. This modified layer forms since manganese is selectively oxidized with respect to the other components. The adhesion of this layer is maintained even under severe stress if the thickness of the modified region does not exceed 20mm. Under this limit, the shape memory characteristics of the alloy are not affected, and at the same time, the specimen acquires properties of passivity comparable with one of the most common austenitic stainless steels at the presence of the same environmental conditions.