Influence of temperature and relative humidity conditionsonthe pan coating of hydroxypropyl cellulose molded capsules
Articolo
Data di Pubblicazione:
2016
Citazione:
Influence of temperature and relative humidity conditionsonthe pan coating of hydroxypropyl cellulose molded capsules / E. Macchi, L. Zema, P. Pandey, A. Gazzaniga, L.A. Felton. - In: EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS. - ISSN 0939-6411. - 100(2016 Mar), pp. 47-57. [10.1016/j.ejpb.2015.11.021]
Abstract:
In a previous study, hydroxypropyl cellulose (HPC)-based capsular shells prepared by injection molding and intended for pulsatile release were successfully coated with 10 mg/cm2 Eudragit® L film. The suitability of HPC capsules for the development of a colon delivery platform based on a time dependent approach was demonstrated. In the present work, data logging devices (PyroButton®) were used to monitor the microenvironmental conditions, i.e. temperature (T) and relative humidity (RH), during coating processes performed under different spray rates (1.2, 2.5 and 5.5 g/min). As HPC-based capsules present special features, a preliminary study was conducted on commercially available gelatin capsules for comparison purposes. By means of PyroButton data-loggers it was possible to acquire information about the impact of the effective T and RH conditions experienced by HPC substrates during the process on the technological properties and release performance of the coated systems. The use of increasing spray rates seemed to promote a tendency of the HPC shells to slightly swell at the beginning of the spraying process; moreover, capsules coated under spray rates of 1.2 and 2.5 g/min showed the desired release performance, i.e. ability to withstand the acidic media followed by the pulsatile release expected for uncoated capsules. Preliminary stability studies seemed to show that coating conditions might also influence the release performance of the system upon storage.
Tipologia IRIS:
01 - Articolo su periodico
Keywords:
Bed temperature; Enteric coating; Hydroxypropyl cellulose capsule; Injection molding; Oral pulsatile release; Relative humidity
Elenco autori:
E. Macchi, L. Zema, P. Pandey, A. Gazzaniga, L.A. Felton
Link alla scheda completa: