Photocatalytic Approaches to Circular Economy: CO2 Photoreduction to Regenerated Fuels in a three-phase photoreactor
Altro
Data di Pubblicazione:
2021
Citazione:
Photocatalytic Approaches to Circular Economy: CO2 Photoreduction to Regenerated Fuels in a three-phase photoreactor / F. Conte, A. Tripodi, G. Ramis, I. Rossetti. ((Intervento presentato al convegno 11th International Symposium on Catalysis in Multiphase Reactors (CAMURE - 11) & 10th International Symposium on Multifunctional Reactors (ISMR - 10) tenutosi a Milano - nel 2021.
Abstract:
Photocatalytic Approaches to Circular Economy: CO2 Photoreduction to Regenerated Fuels in a three-phase photoreactor
Francesco Conte1, Antonio Tripodi1, Gianguido Ramis2, Ilenia Rossetti1*
1 Chemical Plants and Industrial Chemistry Group, Dip. Chimica, Università degli Studi di Milano, CNR-ISTM and INSTM Unit Milano-Università, via C. Golgi 19, 20133 Milano, Italy; 2 DICCA, Università degli Studi di Genova and INSTM Unit-Genova, via all’Opera Pia 15A, 16100 Genoa, Italy
*Corresponding author E-Mail: ilenia.rossetti@unimi.it
1. Introduction
CO2 photocatalytic conversion towards marketable chemicals such as hydrogen, methanol, methane, formaldehyde and formic acid seems to represent a valid and green method to reduce atmospheric concentration of carbon dioxide [1]. It is less energy demanding than traditional processes and does not produce harmful byproducts. For all these reasons photocatalysis appears to be a smart alternative for effective CO2 conversion. Furthermore, the possibility to exploit solar energy represents a free energy source available worldwide.
We have recently proposed an innovative photoreactor, able to operate up to 20 bar and 100°C for the photoreduction of CO2. The advantage of the approach is found in the possibility to enhance CO2 solubility in water (one of the main physical limitations of the process) and the surface adsorption of the reactant over the heterogeneous catalyst [2-4]. High pressure also allows to increase temperature of operation (while keeping sufficiently high concentration of CO2 in liquid phase), with beneficial effects on all the auxiliary steps of the reaction, i.e. mass transfer, sticking probability, etc. Therefore, the development of a unique high pressure device allows to explore unconventional reaction conditions for both applications, to boost the productivity.
Therefore, in this work, we are reporting some high productivity results for the photoreduction of CO2, collected using simple and inexpensive photocatalysts, trying to focus on the expected efficiency under solar light irradiation. The case study is represented by irradiation in Northern Italy (3.7 kWh/m2), specifically Milan, located on the 45.5° parallel, which is an intermediate situation with respect to the maximum and minimum values across Europe, ranging from 5.0 in Southern Europe to 2.6 in Northern Europe.
2. Methods
The innovative photoreactor used for activity testing has been widely described in previous publications [2-4]. An AISI 316 stainless steel, batch type photoreactor was used, with co-axial immersion lamp and bottom stirrer. Testing is done on 1.2 L of solution, allowing ca. 0.1 L of head space for the gas. A thermal bath circulates water around the external heating wall, setting the operating temperature. A 125 W medium pressure Hg lamp was used as light source, emitting between 254 and 364 nm (main emission peak). A detailed mapping of the irradiance through the reactor is supplied by a radiometer. Irradiance ranged between 133 and 157 W/m2 for different tests. This datum is used as comparison with the sunlight irradiance. The catalyst, 0.03 g/cm3, was suspended in demineralized and outgassed water. The suspension has been saturated with CO2 at 7 bar pressure overnight before starting irradiation. Tests lasted 24 h at 7 bar pressure and 80°C. Na2SO3 0.85 g L−1 has been used as hole scavenger. Sulfite conversion was determined by iodometric titration. The liquid phase products (HCOOH, HCHO and CH3OH) were analysed by HPLC (Agilent 1220 Infinity, column Alltech OA-10308, 300 mm-7.8 mm), with UV and refractive index (Agilent 1260 Infinity) detectors. HCHO, critical to analyse was also quantified in parallel by UV-Vis spectrophotometry through the Nash reactant and UV-Vis analysi
Tipologia IRIS:
14 - Intervento a convegno non pubblicato
Elenco autori:
F. Conte, A. Tripodi, G. Ramis, I. Rossetti
Link alla scheda completa: